Buehler AbrasiMatic 300
The AbrasiMatic 300 is a bench-top dual abrasive cutter. This machine enables variety in sample preparation to best fit each sampling process with both manual and automatic cutting capabilities.
- The manual feature allows you to "feel" the cut quality
- Best of both cutting methods with manual and automatic cutting
- Control and "feel" of the cut with the manual cutting in the Y and Z direction
- Allow for sectioning of parts with a 4.5in diameter. (varies based on part shape)
- Consistent and repeatable cuts with the automatic cutting in the Y direction
- Quick vising and cut alignment with x-axis motion (optional)
- Simple user interface to program automatic cutting and set manual cutting
- The automatic cutting creates more time for critical activities
- Electrical break for user safety and quick part change
- A machine that can handle the abrasive environment with a stainless steel T-Slot bed
AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter Specifications
| Voltage/Frequency/Phase | 230VAC, 60Hz; 460VAC, 60Hz; 220VAC, 50Hz; 380VAC, 50Hz / 3 phase |
| Power Consumption | 4.0kW |
| Maximum Current | 15.7amps @ 220/230VAC; 7.9amps @ 460VAC; 9.1amps @ 380VAC |
| Motor Power 5Hp [3.7kW] | Lighting Two LED Goosenecks |
| Recirculation Tank Capacity | 22gal [83ℓ] |
| Hose Fitting Sizes | Intake: 1in [25mm]; Discharge: 2in [50mm] |
| Sound Rating | 78dBA - no load |
| Fume Extractor Size | 3in [75mm] cut-out diameter |
| Control Panel | 7in [175mm] diagonal; 320x240 pixels; 256 color screen, backlight NEMA4 [IP 65] water resistant |
| T-slot table dimensions | 14.375 W x 10in D [365 x 254mm]; 12mm wide t-slots |
| Travel movement | Z-Axis: 5.75in [150mm]; Y-Axis: 10.25in [260mm]; X-Axis: 2.75in [70mm] |
| Auto Y-Axis Feed Rate | 0.3-5in/min [0.1-2.5mm/sec] |
| Window Size | 14 W x 12in H [355 x 300mm] |
| Abrasive Wheel Diameter & Arbor | maximum 12in [305mm] & 1.25in [32mm] |
| Wheel Speed | 2600rpm @ 50/60Hz; 8200 surface ft/min [2700 surface m/min] |
| Maximum Cut Diameter | 4.375in [110mm] |
| Cutting Wheel Torque | 121 in/lb [14Nm] |
| Cutting Chamber | 36 W x 22 D x 8in H [914 x 558 x 203mm] |
| Compliance | CE |
Complete the form below for additional information
